4.5.4 Modify Settings | Global Settings | Serial Ports
Use the Serial Ports menu tree selections during initial setup to configure any serial ports
used by your barcode scanning system. If necessary, you can later make modifications to the
global system settings using the same menu selections, including:
Modify Settings | Global Settings | Serial Ports | Main Port
Use Main Port window to configure communication between the scanner and the Host, or in
a multi-sided layout, between several scanners and a Host.
To edit the Main Port settings:
1. In the tree menu under Modify Settings, navigate to Global Settings | Serial Ports |
Main Port. The Main Port window opens.
To Next Page
Loading...
Need help?
General
