Datalogic DS8110 User Manual

MECHANICAL INSTALLATION
15
2
2.4 WHAT YOU NEED TO KNOW ABOUT YOUR APPLICATION
To assure you get optimal performance out of your DS8110, it must be installed to meet the
complete needs of your application. Therefore, take the time to learn the details of your
application. The better you know your application, the easier it is to apply the DS8110’s
capabilities to meet your application’s requirements.
Below is what you will need to know before you can begin installation:
 Conveyor Specifications
 Conveyor type: Belt, tilt-tray, cross belt, other?
 What is the conveyor width?
 What is the conveyor speed?
 Does conveyor speed vary or is it constant?
 Product Specifications
 Are the packages being transported always singulated (not touching) or non-
singulated (possibly touching)?
 How many different product sizes may be involved?
 Are products justified: toward/away from reader, centered, or variable?
 Application Specifications
 How will the barcode information be used in your application?
 What are your communication requirements?
While it is nearly impossible to cover all application configurations, the next several pages
provide the basics on determining how to mechanically install your DS8110. If you need
additional assistance, feel free to contact your sales representative or customer service
(www.datalogic.com).

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English