Datalogic DS8110 User Manual

DS8110 REFERENCE MANUAL
24
3
3.2 CONNECTING A DS8110 SCANNER
To install a DS8110 barcode scanner, follow this sequence:
 Complete mechanical installation (See Chapter 2.)
 Complete electrical installation (See wiring illustrations provided in this chapter.)
 Observe all electrical safety requirements outlined in this chapter.
 Ground the mounting structure to protective earth (PE) ground.
 If used, wire the photoelectric sensor (or other trigger) to the CBX510 connection
box/SC5000.
 Wire the tachometer to the CBX510 connection box/SC5000 (if used).
 Wire serial ports to the CBX510 connection box/SC5000 if needed.
 Connect the M12 end of the Ethernet cable to the scanner’s HOST port and network
switch as required by your application.
 Connect the scanner to its power supply.
 Connect the power supply to the power source.
 Setup / check scanner operations (See Chapter 5.)

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English