Need help?Do you have a question about the Datalogic DS2400 and is the answer not in the manual?
General| Technology | Laser |
|---|---|
| Light Source | Visible Laser Diode |
| Interface | RS-232 |
| Operating Temperature | 0 to 50 °C / 32 to 122 °F |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 5% to 95% non-condensing |
| Supported Barcodes | Code 39, Code 128, Interleaved 2 of 5, Codabar |
Essential safety information regarding laser light exposure and proper usage of the DS2400 scanner.
Compliance details with international laser safety standards (IEC 825-1, CDRH).
Guidelines for safe and correct power supply connection for different DS2400 models.
Pinout and connection details for the DS2400's 25-pin D-sub connector.
How to connect the power supply to the scanner using the 25-pin connector.
Information on DS2400 serial interface types and configuration methods.
Details the RS232 interface for point-to-point communication and scanner programming.
Explains RS485 full-duplex for long-distance and noisy environments.
Describes RS485 half-duplex for polled systems and multidrop networks.
Explains the step-ladder scanning method and its effective scan calculation.
Describes the picket-fence scanning method and its effective scan calculation.
Essential procedures for cleaning the scanner's laser output window.
To Next Page