2.5.4 General Mounting Guidelines
It is important that you follow these general precautions when installing, setting up, operating,
maintaining, troubleshooting, or replacing any Datalogic products, parts or related
equipment.
As you plan and install your DS8110 barcode scanning system application, be sure to keep
the following guidelines in mind:
All mounting structure assembly and equipment installation can be performed by one
installer.
Determine the proper orientation and position of the barcode scanner.
Leave adequate clearances (approximately 300 mm [12 inches]) for wiring.
Route wires carefully to reduce or minimize electrical noise. When power and
communication wiring must cross, make their intersection perpendicular.
Proper grounding limits the effects of noise due to Electromagnetic Interference (EMI).
To Next Page
Loading...
