1.6 ACCESSORIES
The following accessories are available on request for the DS8110 barcode scanner.
ETH CABLE M12-M12 1M (straight-straight)
Scanner to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-M12 3M (straight-straight)
Scanner to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-M12 5M (straight-straight)
Scanner to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-M12 1M (straight- 90°)
SC5000 to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-M12 3M (straight- 90°)
SC5000 to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-M12 5M (straight- 90°)
SC5000 to Scanner EBC (ETH1 or ETH2)
ETH CABLE M12-RJ45 5M (90°-RJ45)
SC5000 to the Host or Configuration PC (HOST or CFG)
CAB-ETH-M01 M12-IP67 1M (straight- RJ45)
Scanner to the Host or Configuration PC
CAB-ETH-M03 M12-IP67 3M (straight- RJ45)
Scanner to the Host or Configuration PC
CAB-ETH-M05 M12-IP67 5M (straight- RJ45)
Scanner to the Host or Configuration PC
ETH CABLE M12-M12 1M (90°- 90°)
SC5000 to SC5000 EBC (ETH1 or ETH2)
REDS POWER ALARM CABLE 5M
PWR-480B to CBX510 power alarm connections
ETH CABLE M12-M12 0.5M (straight-straight)
Female to Female EBC patch cable; close the EBC when a
scanner is sent to repair, only for Master/Slave
SC5000 to CBX510 for Serial or I/O connections
CAB-DS01-S M12-IP67 1M
Scanner to CBX for Serial or I/O connections
CAB-DS03-S M12-IP67 3M
Scanner to CBX for Serial or I/O connections
CAB-DS05-S M12-IP67 5M
Scanner to CBX for Serial or I/O connections
AS-I CABLE TERMINAL for AS-I branch topology wiring
PWR CABLE, AS-I, 2 Wires, 10M (Backbone with caps)
PWR CABLE, AS-I, 2 Wires, 25M (Backbone with caps)
PWR CABLE M12- ASI standard 1M (Node)
PWR CABLE M12- ASI standard 2M (Node)
PWR CABLE ext. M12 Male-M12 Fem 3M for PG-240
PWR CABLE ext. M12 Male-M12 Fem 5M for PG-240
PWR CABLE, CAB-LP-05 M12 Female-Free Wires 5M
for alternative power connections
To Next Page
Loading...
Need help?
General
