Minimum
Readings
Difference
Between
Scanners
Enter the minimum number of scanners that must read a barcode for it to be considered
a valid read.
Select the check box to display the Strip Filter Settings options. This is a second level
filter that when enabled allows eliminating characters not managed by the host.
Strip All Non Printable
Chars
Select the check box to remove all non- printable ASCII characters from the
code (000-020 and 127).
Click to activate the Text Entry Tool and enter specific characters to be
stripped from the code. Click Submit to save your text to the origin window
text field, or click Cancel to return to origin window without transferring
text.
Select the check box to remove the stripped characters from the code and,
therefore, reduce the code length (collapsed). It can even be null.
Click to activate the Text Entry Tool and enter the substitution character
to replace all the stripped ones. Click Submit to save your text to the origin
window text field, or click Cancel to return to origin window without
transferring text.
3. When you have finished making changes, click Update All to save all pending changes,
click Reset All to revert to all previously saved values, and click Reset Page to revert to
previous saved values on the current page.
Filter Out
Single
Readings
With the check box selected, if only 1 scanner reads a code it will be considered a
NOREAD.
To Next Page
Loading...
Need help?
General
