Datalogic DS8110

DS8110 REFERENCE MANUAL
186
4
4. The graphic on screen indicates Extract Image is in-process. A message will appear
when Extract Image is complete.
0.
To Burn Flash:
1. Click Choose File. In the browse window, select an image file (*.as) to burn to flash.
NOTE: The appearance of these functions may vary from
browser to browser.
2. Click Burn Flash. The graphic on-screen indicates Burn Flash is in-process.
3. A message will appear when Burn Flash is complete.
0.
To Reboot the System:
1. Click Reboot. A confirmation box appears.
2. Click OK to reboot the system, or click Cancel to return to the reboot window without
restarting the system.
0.