Enter/Exit Programming Mode
198 DSM0400 Fixed Mount Area Imager Bar Code Reader
QR CODE
QR Code Enable / Disable
Enables/disables the ability of the reader to decode QR Code labels
QR Code = Disable
QR Code = Enable
.
QR Code Length Control
This feature specifies either variable length decoding, fixed length decoding or
no check length decoding for this symbology.
Variable Length.
For variable length decoding, a minimum and maximum length
may be set.
Fixed Length.
For fixed length decoding, two different lengths may be set.
QR Code Length Control = Variable Length
QR Code Length Control = Fixed Length
DEFAULT
QR Code Length Control = No Check
To Next Page
Loading...
