Datalogic DSM0400 - Codabar Quiet Zones; Codabar Start;Stop Character Match

Enter/Exit Programming Mode
Product Reference Guide 131
Codabar Start/Stop Character Match
When enabled, this option requires that start and stop characters match
DEFAULT
Codabar Start/Stop Character Match = Don’t Require Match
Codabar Start/Stop Character Match = Require Match
.
Codabar Quiet Zones
Specifies the number of quiet zones for Codabar labels. Quiet zones are blank
areas at the ends of a barcode and are typically 10 times the width of the nar-
rowest bar or space in the label.
Codabar Quiet Zones = Auto
DEFAULT
Codabar Quiet Zones = Small Quiet Zones on two sides