Datalogic DSM0400 - I 2 of 5 Length Control

Enter/Exit Programming Mode
Product Reference Guide 111
I 2 of 5 Length Control
This feature specifies either variable length decoding, fixed length decoding or
no check length decoding for the I 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
I 2 of 5 Length Control = Variable Length
I 2 of 5 Length Control = Fixed Length
DEFAULT
I 2 of 5 Length Control = No Check