Datalogic Gryphon I GD44 Series - Using the Gryphon I GD44 XX

Using the Gryphon™ I GD44XX
Quick Reference Guide 7
Using the Gryphon™ I GD44XX
The Gryphon™ I GD44XX normally functions by capturing
and decoding codes. The reader is equipped with an internal
motion-sensing function which activates the aiming system on
device motion. The intelligent aiming system indicates the
field of view which should be positioned over the bar code:
Aiming System
Relative Size and Location of Aiming System Pattern
A red beam illuminates the label. The field of view indicated
by the aiming system will be smaller when the reader is closer
to the bar code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be
read closer to the unit. Symbologies with larger bars or ele-
ments (mil size) should be read farther from the unit.
If the aiming system is centered and the entire bar code is
within the aiming field, you will get a good read. Successful
reading is signaled by an audible tone plus a good-read green
spot LED indicator.
Reference the Gryphon I GD44XX Product Reference Guide
(PRG) for more information about this feature and other pro-
grammable settings.
Linear bar code
2D Matrix symbol