Datalogic Gryphon I GBT4500

Other manuals for Datalogic Gryphon I GBT4500

Product Reference Guide354 pages

Questions and Answers

B
bryanwilliamAug 7, 2025
What to do if Datalogic Barcode Reader LED is on but barcode doesn't decode?
- M
  Matthew PetersonAug 7, 2025
  If the LED is on, but the bar code doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct bar code type. In this case, ensure the reader is programmed to read the type of bar code scanned. * The bar code label may be unreadable. Check the label to ensure it is not defaced. You can also try scanning another bar code type. * The distance between the reader and the bar code might be incorrect. Try moving the reader closer to or further from the bar code.
E
erincarterAug 12, 2025
Why Datalogic Barcode Reader does nothing when I pull the scan button?
- Z
  zcurtisAug 12, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue might be due to: * No power to the reader. Check the system power and ensure the power supply is connected. * Loose interface or power cables. Make sure all cable connections are secure.
S
Samantha JonesAug 17, 2025
What to do if Datalogic Gryphon I GBT4500 Barcode Reader LED is on, but the barcode does not decode?
- S
  Steve SerranoAug 17, 2025
  If the LED is on but your Datalogic Barcode Reader isn't decoding, there could be a few reasons. First, the reader might not be programmed to read that specific type of barcode, so ensure it is properly configured. Second, the barcode label itself might be damaged or unreadable; check for any damage and try a different barcode. Finally, the distance between the reader and the barcode could be off; try moving the reader closer or further away from the barcode.
E
Edward HuangAug 22, 2025
Why nothing happens when I pull the scan button on my Datalogic Gryphon I GBT4500 Barcode Reader?
- S
  Stephanie StokesAug 22, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue is likely related to power or connectivity. First, check the system power to ensure the imager is receiving power and that the power supply is properly connected. Second, make sure all interface and power cable connections are secure, as loose cables can prevent the device from functioning.
M
Matthew WallaceAug 27, 2025
How to fix Datalogic Barcode Reader that decodes but doesn't transmit to host?
- P
  Paul CoxAug 27, 2025
  If the bar code is decoded but not transmitted to the host, the Datalogic Barcode Reader may not be programmed for the correct host type. To resolve this, scan the appropriate host type bar code.
L
Leroy ShermanSep 1, 2025
How to fix Datalogic Gryphon I GBT4500 Barcode Reader that decodes but does not transmit to the host?
- H
  Hannah SanchezSep 1, 2025
  If your Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, the imager might not be programmed for the correct host type. Scan the appropriate host type barcode to resolve this.