Need help?Do you have a question about the Datalogic Gryphon I GFS4100 and is the answer not in the manual?
General| Product Name | Gryphon I GFS4100 |
|---|---|
| Category | Barcode Reader |
| Reading Distance | Up to 30 cm |
| Image Capture | Yes |
| IP Rating | IP52 |
| Print Contrast | 20% minimum |
| Pitch Angle | ± 60° |
| Ambient Light | 0 to 100, 000 Lux |
| Light Source | LED |
| Interface | USB, RS232, Keyboard Wedge |
| Power Supply | 5 VDC +/- 5% |
| Decode Capability | 1D, 2D, OCR |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5 to 95% (Non-condensing) |
| Drop Specification | 1.5 m drop to concrete |
| Operating Voltage | 5V DC +/- 5% |
Provides manual conventions and an overview of the reader, its features, and operation.
Contains background information and detailed instructions for complex programming items.
Details available support channels like website, reseller, and telephone assistance.
Describes the reader's typical factory programming and available models.
Explains methods for configuring the reader, including barcodes and software.
Instructions for checking reader/accessories for damage and retaining packaging.
Steps to connect reader, select interface, and configure settings.
Details on configuring interface settings and global interface features.
Overview of parameters applicable to all models, grouped by function.
Instructions on scanning programming barcodes to configure features.
Configuration options specific to the RS-232 serial interface.
Configuration options for RS-232 and USB-COM interfaces.
Configuration options for USB Keyboard interfaces.
Features for defining data transmission format, prefixes, and suffixes.
Settings for configuring digital output activation and deactivation events.
Options for managing reader power consumption and sleep modes.
Settings related to illumination, LEDs, beepers, and scanning features.
Enables/disables and configures various barcode symbologies.
Details on entering Service Mode, sending commands, and saving configuration.
Explains RS-232 parameters like Baud Rate, Data Bits, Parity, and Handshaking.
Covers parameters for RS-232/USB-COM interfaces like Intercharacter Delay and ACK/NAK options.
Details the pin assignments for RS-232 electrical connections.
Explains the meaning of LED indicators and beeper sounds for reader status.
Lists error codes and associated LED/beep indications upon reader startup.
Lists common configuration settings, their defaults, and page references.
Provides typical representations of various barcode symbology types.
Lists barcodes for entering numbers and characters from a keypad.
Lists reserved characters, their hex values, and notes for use.
Details control character sets for USB Keyboard platforms.
Explains methods for combining modifier keys with other keys for input.
To Next Page