Datalogic Gryphon I GFS4100 - UPC-E Minimum Reads; UPC-E Number System Character Transmission

ENTER/EXIT PROGRAMMING MODE UPC-E Number System Character Transmission
Product Reference Guide 85
UPC-E Number System Character Transmission
This feature enables/disables transmission of the UPC-E system number character.
UPC-E Number System Character = Do not transmit
UPC-E Number System Character = Transmit
DEFAULT
UPC-E Minimum Reads
Specifies the minimum number of consecutive times a UPC-E label must be decoded before it is
accepted as a good read.
UPC-E Minimum Reads = 1
UPC-E Minimum Reads = 2
DEFAULT
UPC-E Minimum Reads = 3
UPC-E Minimum Reads = 4