Reading Parameters ENTER/EXIT PROGRAMMING MODE
70
Gryphon™ I GFS4170/GFS4150-9
Green Spot Duration
Specifies the duration of the good read pointer beam after a good read.
Green Spot Duration = Disable (Green Spot is Off)
Green Spot Duration = Short (300 msec)
DEFAULT
Green Spot Duration = Medium (500 msec)
Green Spot Duration = Long (800 msec)
LED Indication
Specifies when the scanner’s LEDs will provide notification of successful reading of a barcode.
Selections:
• On Decode = Indicate Good Read immediately after decoding.
• After Transmission = Indicate Good Read after code transmission to host.
LED Indication = On Decode
DEFAULT
LED Indication = After Transmission
To Next Page
Loading...
