References
244
Gryphon™ I GFS4170/GFS4150-9
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following
the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets"
below) or individually per symbology (see "Label ID: Set Individually Per Symbology"on
page 246). If you wish to program the reader to always include an
industry standard label
identifier for ALL symbology types, see "Global AIM ID"on page 43.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. Table 31 shows the USA and the EU sets.
CAUTION
When changing from one Label ID set to another, all other reader configu-
ration settings, including the host interf
ace type, will be erased and set to
the standard factory defaults. Any custom configuration or custom defaults
will be lost.
Table 31. Label ID Pre-loaded Sets
Symbology USA Label ID set EU Label ID set
ASCII
character
Hexadecimal
value
ASCII
character
Hex i decimal
value
ABC Codabar S 530000 S 530000
Anker Plessey o 6F0000 o 6F0000
CODABAR % 250000 R 520000
CODE128 # 230000 T 540000
CODE32 A 410000 X 580000
CODE39 * 2A0000 V 560000
CODE39 CIP Y 590000 Y 590000
CODE93 & 260000 U 550000
DATALOGIC 2OF5 s 730000 s 730000
EAN13 F 460000 B 420000
EAN13 P2 F 460000 L 4C0000
EAN13 P5 F 460000 M 4D0000
EAN8 FF 464600 A 410000
EAN8 P2 FF 464600 J 4A0000
EAN8 P5 FF 464600 K 4B0000
To Next Page
Loading...
