Datalogic Gryphon I GFS4100 - Datalogic 2 of 5; Datalogic 2 of 5 Enable;Disable; Datalogic 2 of 5 Check Character Calculation

ENTER/EXIT PROGRAMMING MODE Datalogic 2 of 5 Enable/Disable
Product Reference Guide 155
DATALOGIC 2 OF 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the reader will not read Datalogic 2 of 5 barcodes.
DEFAULT
Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Datalogic 2 of 5 check
character.
DEFAULT
Datalogic 2 of 5 Check Character Calculation = Disable
Datalogic 2 of 5 Check Character Calculation = Enable