Do you have a question about the Datalogic Gryphon I GBT4400 2D and is the answer not in the manual?
Scanner Type | 2D Imager |
---|---|
Connectivity | Bluetooth |
IP Rating | IP52 |
Print Contrast Ratio (Minimum) | 25% |
Interface | USB, RS-232, Keyboard Wedge |
Operating Temperature | 0 to 50 °C / 32 to 122 °F |
Storage Temperature | -20 to 70 °C / -4 to 158 °F |
Drop Resistance | 1.8 m (6 ft) to concrete |
Weight | 245 g / 8.64 oz |
Dimensions | 18.1 x 7.1 x 10.0 cm / 7.1 x 2.8 x 3.9 in |
Light Source | Red LED |
Image Sensor | CMOS |
Decode Capability | 1D / 2D / Postal / Stacked codes |
Scanning Technology | Imaging |
Resolution | 752 x 480 pixels |
Skew Angle | +/- 65° |
Humidity | 5 to 95% non-condensing |
Drop Specification | 1.8 m (6 ft) to concrete |
Power Supply | 5 VDC +/- 5% |
Beeper | Yes |
Indicators | LEDs, Beeper |
Supported Barcodes | All standard 1D and 2D barcodes |
Describes the reader's ability to scan from any orientation.
Lists the types of barcodes the reader can decode.
Instructions on how to position the base station for optimal use.
Steps to connect the base station to the host and power.
Process to establish a wireless link between the reader and base.
Overview of available host interface types for the reader.
Configuration options for RS-232 and IBM host interfaces.
Configuration options for Keyboard Wedge and Wand emulation.
How to set the keyboard's country/language mode.
Guide to reconfiguring the reader using barcodes.
Restores factory default settings for the reader.
Describes trigger-based scanning modes like Single and Hold.
Enables precise scanning within a defined range.
Lists optical performance like angles, light source, and field of view.
Lists all supported 1D and 2D barcode symbologies.
Explains reader status via LEDs and beeps (power-up, good read, errors).
General FCC compliance statement and digital device limits.
Laser safety standards and usage precautions.
Lists conditions that void the product warranty.
Details on obtaining product documentation and support.