Datalogic Gryphon I GBT4400 2D User Manual

Statement of Agency Compliance
Quick Reference Guide 49
Imager Labeling
Sample labels are shown here to illustrate their location only.
Please view the labels on your product for actual details, as
they may vary from those depicted.
Aiming System
The Gryphon
™
aiming system meets the Class 2 require-
ments for laser safety. The laser information is located on the
window of the Scanner and is shown below.
Contains FCC ID: 09NDLBTMCX
IC: 3862A-DLBTMCX
N263
See product manual and
package for patent listing.
ACCESSORY
LISTED
I.T.E., .3KRU
Scanner Regulatory Label
Base Station Label
DO NOT STARE INTO BEAM
See Pkg for patent listing
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
OUTPUT RADIATION 1 mW AVG.
EMITTED WAVE LENGTH 650 nm 12 ms PULSE
IEC60825-1:2007
CAUTION-CLASS 2 LASER
LIGHT WHEN OPEN
AVOID EXPOSURE-LASER LIGHT
IS EMITTED FROM THIS APERTURE
This product complies with 21CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007

Datalogic Gryphon I GBT4400 2D Specifications

General

Scanner Type	2D Imager
Connectivity	Bluetooth
IP Rating	IP52
Print Contrast Ratio (Minimum)	25%
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Drop Resistance	1.8 m (6 ft) to concrete
Weight	245 g / 8.64 oz
Dimensions	18.1 x 7.1 x 10.0 cm / 7.1 x 2.8 x 3.9 in
Light Source	Red LED
Image Sensor	CMOS
Decode Capability	1D / 2D / Postal / Stacked codes
Scanning Technology	Imaging
Resolution	752 x 480 pixels
Skew Angle	+/- 65°
Humidity	5 to 95% non-condensing
Drop Specification	1.8 m (6 ft) to concrete
Power Supply	5 VDC +/- 5%
Beeper	Yes
Indicators	LEDs, Beeper
Supported Barcodes	All standard 1D and 2D barcodes