Datalogic Gryphon I GBT4400 2D User Manual

Statement of Agency Compliance
48 Gryphon™ I GBT4400 2D
FCC RF Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements,
for mobile configurations, a separation distance of at least 20
cm must be maintained between the antenna of this device
and all persons.
This device must not be co-located or operating in conjunc-
tion with any other antenna or transmitter.
Canadian Notice
This equipment does not exceed the Class B limits for radio
noise emissions as described in the Radio Interference Regula-
tions of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radioelec-
triques depassant les limites applicables aux appareils nume-
riques de la classe B prescrites dans le Reglement sur le
brouillage radioelectrique edicte par le ministere des Commu-
nications du Canada.
Power Supply
This device is intended to be connected to a UL Listed/CSA
Certified computer which supplies power directly to the read-
er or else be supplied by UL Listed/CSA Certified Power Unit
marked “Class 2” or LPS power source rated 5-14V minimum
900mA, which supplies power directly to the Base/Charger via
the power connector of the Base itself.
CAUTION
Exposure to Radio-Frequency Radiation
CAUTION
Do not attempt to open or otherwise service any compo-
nents in the optics cavity. Opening or servicing any part of
the optics cavity by unauthorized personnel may violate
laser safety regulations.

Datalogic Gryphon I GBT4400 2D Specifications

General

Scanner Type	2D Imager
Connectivity	Bluetooth
IP Rating	IP52
Print Contrast Ratio (Minimum)	25%
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Drop Resistance	1.8 m (6 ft) to concrete
Weight	245 g / 8.64 oz
Dimensions	18.1 x 7.1 x 10.0 cm / 7.1 x 2.8 x 3.9 in
Light Source	Red LED
Image Sensor	CMOS
Decode Capability	1D / 2D / Postal / Stacked codes
Scanning Technology	Imaging
Resolution	752 x 480 pixels
Skew Angle	+/- 65°
Humidity	5 to 95% non-condensing
Drop Specification	1.8 m (6 ft) to concrete
Power Supply	5 VDC +/- 5%
Beeper	Yes
Indicators	LEDs, Beeper
Supported Barcodes	All standard 1D and 2D barcodes