ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
128
GRYPHON™ I GD/GBT/GM4500
EAN-8
The following options apply to the EAN-8 symbology.
EAN-8 Enable/Disable
When disabled, the reader will not read EAN-8 bar codes.
EAN-8 Check Character Transmission
Enable this option to transmit the check character along with EAN-8 bar code data.
$C8BEN00
EAN-8
= Disable
EAN-8
= Enable
$C8BEN01
$C8BCT00
EAN-8 Check Character Transmission = Don’t Send
EAN-8 Check Character Transmission = Send
$C8BCT01
To Next Page
Loading...
