Datalogic Gryphon I GD44 Series User Manual

Operating Modes
Quick Reference Guide 23
Stand Mode: In Stand Mode, the illumination remains on for
a configurable amount of time after a good read occurs. The
scanner exits stand mode when movement is detected. If the
trigger is activated from stand mode, the scanner transitions
into one of the triggered modes.
ENTER/EXIT PROGRAMMING MODE
 Scan Mode = Trigger Single
Scan Mode = Trigger Pulse Multiple
Scan Mode = Trigger Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode

Datalogic Gryphon I GD44 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GD44 Series
Category	Barcode Reader
Language	English