Datalogic Gryphon I GD4500 User Manual (English)

Other manuals for Datalogic Gryphon I GD4500

Questions and Answers:

A
Amanda CaseyAug 7, 2025
What to do if Datalogic Gryphon I GD4500 LED is on but barcode doesn't decode?
- E
  Eric HoldenAug 7, 2025
  If the LED is on, but the bar code doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct bar code type. In this case, ensure the reader is programmed to read the type of bar code scanned. * The bar code label may be unreadable. Check the label to ensure it is not defaced. You can also try scanning another bar code type. * The distance between the reader and the bar code might be incorrect. Try moving the reader closer to or further from the bar code.
H
Heather GonzalezAug 12, 2025
Why Datalogic Barcode Reader does nothing when I pull the scan button?
- R
  Robert SandersAug 12, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue might be due to: * No power to the reader. Check the system power and ensure the power supply is connected. * Loose interface or power cables. Make sure all cable connections are secure.
R
Russell JordanAug 17, 2025
What to do if Datalogic Gryphon I GD4500 Barcode Reader LED is on, but the barcode does not decode?
- D
  Dr. Susan ThompsonAug 17, 2025
  If the LED is on but your Datalogic Barcode Reader isn't decoding, there could be a few reasons. First, the reader might not be programmed to read that specific type of barcode, so ensure it is properly configured. Second, the barcode label itself might be damaged or unreadable; check for any damage and try a different barcode. Finally, the distance between the reader and the barcode could be off; try moving the reader closer or further away from the barcode.
C
Cheryl LuceroAug 22, 2025
Why nothing happens when I pull the scan button on my Datalogic Gryphon I GD4500?
- C
  Cody KellyAug 22, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue is likely related to power or connectivity. First, check the system power to ensure the imager is receiving power and that the power supply is properly connected. Second, make sure all interface and power cable connections are secure, as loose cables can prevent the device from functioning.
C
cfieldsAug 27, 2025
How to fix Datalogic Gryphon I GD4500 that decodes but doesn't transmit to host?
- A
  Abigail MejiaAug 27, 2025
  If the bar code is decoded but not transmitted to the host, the Datalogic Barcode Reader may not be programmed for the correct host type. To resolve this, scan the appropriate host type bar code.
A
Annette AvilaSep 1, 2025
How to fix Datalogic Barcode Reader that decodes but does not transmit to the host?
- S
  Shirley Fleming DVMSep 1, 2025
  If your Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, the imager might not be programmed for the correct host type. Scan the appropriate host type barcode to resolve this.

Datalogic Gryphon I GD4500 Specifications

General

Type	Handheld Barcode Reader
Model	Gryphon I GD4500
Print Contrast Ratio (Minimum)	30%
Motion Tolerance	Up to 1.5 m/s
Drop Specification	1.5 m
IP Rating	IP52
Connectivity	USB, RS-232, Keyboard Wedge
Humidity	5% to 95% (non-condensing)
Power Supply	5 VDC
Product Type	Barcode Scanner
Barcode Types	Code 39, Code 128, UPC/EAN
Decode Capability	1D Barcodes
Storage Temperature	-20 to 70 °C / -4 to 158 °F