Quick Reference Guide 33
Appendix A. Product Labeling & Power Supply
NOTE
Labels are shown here to illustrate their
location onl
y. Please view the labels on
your product for actual details.
IEC CLASS 1 LASER PRODUCT
Class IIa Laser Product. Avoid long term viewing of direct
laser light. Appareil á laser de classe IIa. Eviter toute
exposition prolongée de la vue à lumière laser directe.
6-1018
Scanner Host PowerAux. Port
EAS Opening
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Output:
+5V
+12V
Input: 50 - 60 Hz (0.5 - 0.25A)
100 - 240VAC (P/N 8-0582)
Power: 18 Watts (max)
THIS LASER PRODUCT COMPLIES WITH 21CFR 1040 AS APPLICABLE AS A CLASS IIA PRODUCT
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est confirme à la norme NMB-003 du Canada.
N263
NRTL
Safety
tested
Production
monitored
PRODUCT SERVICE
Product of USA
U S
XXXXXXXXXXXX
CAUTION - CLASS 3R LASER RADIATION WHEN OPEN.
AVOID DIRECT EYE EXPOSURE.
6-1012
COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: ... OTHER
PATENTS PENDING
Power Supply
Models require either a Listed class II or class III with a Limited Power Source
(LPS).
For the safety certification to be valid, class III inpu
t power sources must be
IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC ±10% Output: 10 - 12 VDC ±10%
Max. Current: 1.5 A
Atención
Características de la
fuente de alimentación
eléctrica.
Entrada: 100 - 240 Vca
600mA 50/60 Hz
Salida: +12 VDC 1500mA.
(-) Negativo al centro
Utilice en su red solo fuentes certificadas
en Argentina.
El uso de fuentes de alimentación no
compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el
usuario.
To Next Page
Loading...
Need help?
General
