Exit and Save Configuration
SELECT EAN/UPC PREFIXES
When scanning the following codes, barcodes starting with the selected
prefixes will be read and transmitted only if the ADD ON is present
NOTE
. If no ADD
ON is found, the barcode will not be read. Barcodes starting with different
characters are read regardless of ADD ON presence and transmitted always
without ADD ON.
OR
select one or more of the following prefixes:
378/379
434/439
414/419
977
978
979
The commands above are not mutually exclusive. They can be used to configure more than one
set of prefixes simultaneously.
To Next Page
Loading...
Need help?
General
