POWERSCAN® D8330/M8300/M8300-DK
5.16 FIRMWARE UPGRADE
Device firmware upgrades can be performed from your PC through either a USB or
serial connection (RS-232). Download the free configuration software tool Aladdin
from the Datalogic web site:
http://www.scanning.datalogic.com and install it by
clicking on the setup file.
Connect the device to the PC via USB or serial connection (RS-232).
Launch Aladdin on your PC. From the menu, select Tools > firmware upgrade.
Read the code below and position the reader onto the cradle:
prepare device for firmware upgrade
Ì$+RN2$-SÎ
OR
Press the cradle button if present (to update the cradle only).
The device will automatically be reset.
Proceed with the firmware upgrade (see the Aladdin on-line help for details).
Do not interrupt firmware upgrade downloading for any reason.
CAUTION
To Next Page
Loading...
