Exit and Save Configuration
CAPS LOCK AUTO-RECOGNITION (IBM AT COMPATIBLE ONLY)
enable
NUM LOCK
num lock unchanged
This selection is used together with the Alt Mode interface selection for AT or Notebook PCs.
It changes the way the Alt Mode procedure is executed; therefore it should be set as follows:
• if your keyboard Num Lock is
normally on
• if your keyboard Num Lock is
use num lock unchanged
normally off
use toggle num lock
In this way the device will execute the Alt Mode procedure correctly for your application.
INTER-CHARACTER DELAY
delay between characters transmitted to Host
ÌCK3Î
Read 2 numbers from the table where:
00 = DELAY disabled
01-99 = DELAY from 1 to 99 milliseconds
delay disabled
To Next Page
Loading...
Need help?
General
