User’s Guide 13
Active Symbologies
The active (enabled) bar code symbologies in the factory defaults are:
• Code 39 (C39)
• Code 128 (C128)
• Interleaved 2 of 5 (I 2 of 5)
Your scanner should be pre-programmed with these standard factory
default settings, unless...
...it was shipped to you programmed with unique, customer con-
figuration settings.
...you or another user have made changes to scanner program-
ming.
Enhanced Scanning for Hard-to-Read Bar Codes
Decoded scanners can be programmed to decode extremely poor
quality bar codes by activating advanced Quadralogic II
™ Decoding.
To select this feature, see the PowerScan
®
Scanner Programming
Guide available from your dealer, or you can download the manual
from our website.
Scanner programming can also be performed using your PC and the
Configurator Express
™ On-Screen Programming tool also available
from your dealer.
To Next Page
Loading...
