How to fix degraded barcode reading ability on Datalogic QuickScan L QD 2300?
If the barcode reading ability of your Datalogic Barcode Reader has degraded, the scan window may have become scratched or contaminated with dust. Replace the window as instructed in this guide.
Why Datalogic Barcode Reader laser is on, but barcode does not decode?
If the Datalogic Barcode Reader's laser is on but the barcode isn't decoding, it could be due to a few reasons. First, the scanner might not be programmed for the correct barcode type; in that case, refer to the Product Reference Guide (PRG) for more information. Second, the barcode label may be unreadable because it's defaced, so try scanning a different barcode. Finally, the distance between the scanner and barcode might be off, so try moving the scanner closer or further away from the barcode.
What to do if Datalogic QuickScan L QD 2300 Barcode Reader decodes but not transmitting to the host?
If the Datalogic Barcode Reader decodes the barcode but doesn't transmit it to the host, the scanner may not be programmed for the correct host type. To resolve this, scan the appropriate host type barcode. Refer to the Product Reference Guide (PRG) for more information.
Why nothing happens when scan button is pulled on Datalogic QuickScan L QD 2300?
If nothing happens when you pull the scan button on your Datalogic Barcode Reader, it could be due to a couple of reasons. First, there might be no power to the scanner, so check the system power and ensure the power supply is connected. Second, the interface or power cables might be loose, so make sure all cable connections are secure.
General| Brand | Datalogic |
|---|---|
| Model | QuickScan L QD 2300 |
| Category | Barcode Reader |
| Language | English |
To Next Page
