Datalogic QuickScan Lite QW2100 Quick Reference Guide

36 QuickScan
TM
Lite QW2100
Warranty
Datalogic warrants to Customer that Datalogic's products will be
free from defects in materials and workmanship for a period of 3
years from product shipment.
Warranty Coverage
Datalogic warrants that the goods delivered under these General
Terms for the Sale of Goods shall be free from defects in materi-
als and workmanship under normal and proper use during the
Warranty Period (as defined below). Datalogic’s liability under
this warranty is limited to furnishing the labor and parts neces-
sary to remedy any defect covered by this warranty and restore
the product to its normal operating condition. Repair or replace-
ment of product during the warranty does not extend the original
warranty term. Products are sold on the basis of specifications
applicable at the time of manufacture and Datalogic has no obli-
gation to modify or update products once sold. The warranty pe-
riod shall extend from the date of shipment from Datalogic for
the duration published by Datalogic for the product at the time of
purchase (“Warranty Period”).
If, during the Warranty Period, Datalogic determines that a prod-
uct has defects in material or workmanship, Datalogic shall, at its
sole option repair or replace the product without additional
charge for parts and labor, or give a credit for the defective prod-
ucts duly returned to Datalogic. To perform repairs, Datalogic
may use new or reconditioned parts, components, subassem-
blies or products that have been tested as meeting applicable
specifications for equivalent new material and products. Buyer
will allow Datalogic to scrap all parts removed from the repaired
product. Datalogic warrants repaired hardware devices only,
against defects in workmanship and materials on the repaired
assembly for a 90 day period starting from the date of shipment
of the repaired product from Datalogic or until the expiration of
the original Warranty Period, whichever is longer. Datalogic does
not guarantee, and it is not responsible for, the maintenance of,
damage to, or loss of configurations, data, and applications on
the repaired units and at its sole discretion can return the units
in the “factory default” configuration or with any software or
firmware update available at the time of the repair (may be new-
er than the firmware or software installed during the manufac-
ture of the product). Buyer accepts responsibility to maintain a
backup copy of its software and data.
Warranty Exclusions
The Datalogic Warranty shall not apply to:
(i) any product which has been damaged, modified,
altered, repaired or upgraded by other than Data-
logic service personnel or its authorized represen-
tatives;
(ii) defects or damages caused by any third parties’ tort
committed against the Buyer.

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g