R
Richard LittleJul 27, 2025
What to do if Datalogic QuickScan Lite QW2400 Barcode Reader LED is on, but the barcode does not decode?
- JJennifer WalshJul 27, 2025
If the LED is on but your Datalogic Barcode Reader isn't decoding barcodes, it could be due to several reasons. First, the reader might not be programmed to read that specific barcode type; you should ensure it is properly programmed. Secondly, the barcode itself might be damaged or unreadable, so check the label. Finally, the distance between the reader and the barcode could be incorrect; try adjusting the distance.