Product Reference Guide 113
1D Symbologies
Introduction
The scanner supports the following 1D symbologies (bar code types). Symbol-
ogy-dependent options for each symbology are included in this chapter. See
"2D Symbologies" starting
on page 201 for configuration of 2D bar codes.
Standard Factory Settings for Symbologies
Default settings are indicated at each feature/option with a green arrow. Also
reference Appendix B, for a listing of the most widely used
set of standard fac-
tory settings. That section also
provides space to record any custom settings
needed or implemented for your system.
UPC-A on page 115 Interleaved 2 of 5 (I 2 of 5) on page 152
UPC-E on page 118 Interleaved 2 of 5 CIP HR on page 157
EAN 13 on page 121 Datalogic 2 of 5 on page 158
EAN 13 on page 121 (JAN 13) Codabar on page 162
EAN 8 on page 124 (JAN 8) ABC Codabar on page 169
Add-Ons on page 127 Code 11 on page 171
GS1 DataBar
™
Omnidirectional on page 129
Standard 2 of 5 on page 175
GS1 DataBar™ Expanded on page 131 Industrial 2 of 5 on page 179
GS1 DataBar™ Limited on page 134 IATA on page 183
Code 39 on page 135 ISBT 128 on page 184
Code 32 (Italian Pharmaceutical) on page
143
MSI on page 187
Code 39 CIP (French Pharmaceutical) on
page 144
Code 93 on page 191
Code 128 on page 145 Follett 2 of 5 on page 197
GS1-128 on page 151 BC412 on page 197
To Next Page
Loading...
Need help?
General
