Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode UPC/EAN Global Settings
126 QuickScan™ Lite QW2400
UPC/EAN Global Settings
This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN
8 symbologies, and affects all of these unless otherwise marked for each fea-
ture description.
UPC/EAN Price Weight Check
This feature enables/disables calculation and verification of price/weight check
digits.
Options are
•Disabled
• Enable 4-digit price-weight check-digit ca
lculation
• Enable 5-digit price-weight check-digit ca
lculation
• Enable European 4-digi
t price-weight check-digit calculation
• Enable European 5-digi
t price-weight check-digit calculation
$ Price Weight Check = Disabled
$ Price Weight Check = 4-digit price-weight check
$ Price Weight Check = 5-digit price-weight check
$ Price Weight Check = European 4-digit price-weight check
$ Price Weight Check = European 5-digit price-weight check
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)