Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)
154 QuickScan™ Lite QW2400
I 2 of 5 Check Character Transmission
Enable this option to transmit the check character along with I 2 of 5 bar code
data.
I 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the I 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
NOTE
This feature is valid only when I 2 of 5
Check Character Calculation is enabled.
$CI2CT00
I 2 of 5 Check Character Transmission = Don’t Send
$CI2CT01
I 2 of 5 Check Character Transmission = Send
DEFAULT
$CI2LC00
I 2 of 5 Length Control = Variable Length
$CI2LC01
I 2 of 5 Length Control = Fixed Length
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)