Datalogic QuickScan Lite QW2400 User Manual

Product Reference Guide 233
Chapter 4
References
This section contains explanations and examples of selected bar code features.
See
"Configuration Using Bar Codes" starting on page 17 for the actual bar code
labels used to configure the scanner.
RS-232 PARAMETERS on page 234
• RS-232 Only on page 234
• RS-232/USB COM Parameters on page 235
KEYBOARD INTERFACE on page 242
• Wedge Quiet Interval on page 242
• Intercharacter Delay on page 243
• Intercode Delay on page 244
DATA FORMAT on page 245
• Data Editing on page 245
• Global Prefix/Suffix on page 246
• Global AIM ID on page 247
• Label ID on page 248
• Character Conversion on page 252
SCANNING FEATURES on page 253
• Scanning Features on page 253
SCANNING FEATURES on page 253
• Scan Mode on page 253
• Scanning Active Time on page 254
• Flash On Time on page 255
• Flash Off Time on page 256
SYMBOLOGIES on page 257
• Set Length on page 257
• Set Length on page 257

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)