Datalogic QuickScan Lite QW2400 - Good Read: When to Indicate

Enter/Exit Programming Mode LED and Speaker Indicators
88 QuickScan™ Lite QW2400
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or
LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS
goes inactive, then active
NOTE
This option, which uses CTS, is only valid for RS-232 interfaces.
$CBPIN00
Indicate Good Read = After Decode
$CBPIN01
Indicate Good Read = After Transmit
$CBPIN02
Indicate Good Read = After CTS Goes Inactive, Then Active
DEFAULT