Datalogic QuickScan Lite QW2400 User Manual

RS-232/USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide 27
Beep On ASCII BEL
When this parameter is enabled, the scanner issues a beep when a <BEL> char-
acter is detected on the RS-232 serial l
ine. <BEL> is issued to gain a user's
attention to an illegal entry or other important event.
Beep On Not on File
This option enables/disables the action of the scanner to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CR2BB00
Beep On ASCII BEL = Disable
$CR2BB01
Beep On ASCII BEL = Enable
DEFAULT
$CBPNF00
Beep On Not On File = Disable
$CBPNF01
Beep On Not On File = Enable
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)