Enter/Exit Programming Mode
Product Reference Guide
19
Global Interface Features
The following interface features are configurable by all interface types. To set
features specific to your interface, turn to that section of this manual.
Host Commands — Obey/Ignore
This option specifies whether the scanner will obey or ignore host commands.
When set to ignore, the scanner will ignore all host commands except for those
necessary for:
•service mode
• flash programming mode
•keeping the inte
rface active
• transmission of labels.
HOST COMMANDS — OBEY/IGNORE
on page 19
USB SUSPEND MODE
on page 20
$CIFIH00
Host Commands = Obey
$CIFIH01
Host Commands = Ignore
To Next Page
Loading...
