Enter/Exit Programming Mode Datalogic 2 of 5
158 QuickScan™ Lite QW2400
Datalogic 2 of 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the scanner will not read Datalogic 2 of 5 bar codes.
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Data-
logic 2 of 5 check character.
$CD2EN00
Datalogic 2 of 5 = Disable
$CD2EN01
Datalogic 2 of 5 = Enable
DEFAULT
$CD2CC00
Datalogic 2 of 5 Check Character Calculation = Disable
$CD2CC01
Datalogic 2 of 5 Check Character Calculation = Enable
DEFAULT
To Next Page
Loading...
