Enter/Exit Programming Mode USB-OEM Device Usage
68
QuickScan™ Lite QW2400
USB-OEM Device Usage
The USB-OEM protocol allows for the scanner to be identified as one of two dif-
ferent types of bar code scanners. Depending on what other scanners you may
a
lready have connected to a USB-OEM POS, you may need to change this setting
to enable all devices to communicate.
Options are:
• Tabletop Scanner
• Handheld Scanner
USB-OEM Interface Options
This setting provides for an interface specific control mechanism.
Options are:
• Obey — Obey Scanner Configuration Host Commands
• Ignore — Ignore Scanner Configuration Host Commands
NOTE
It may be necessary to switch device usage when connecting
two scann
ers of the same type to a POS system.
$CIBUT00
USB-OEM Device Usage = Tabletop Scanner
$CIBUT01
USB-OEM Device Usage = Handheld Scanner
$CIFO101
USB-OEM Interface Options = Obey
$CIFO102
USB-OEM Interface Options = Ignore
To Next Page
Loading...
