Datalogic QuickScan Lite QW2400 User Manual

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 213
Maxicode
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the
Secondary Message is not readable.
Maxicode = Disable
Maxicode = Enable
DEFAULT
$CMXEN00(CR)
$CMXEN01(CR)
Maxicode Primary Message Transmission = Disable
Maxicode Primary Message Transmission = Enable
DEFAULT
$CMXPT00(CR)
$CMXPT01(CR)

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)