RS-232/USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide
25
RS-232/USB-COM Interfaces
The programming bar codes in this chapter allow modifications to the standard
RS-232 and USB-Com interfaces.
Standard Factory Settings
Reference Appendix B, for a listing of standard factory settings.
STANDARD FACTORY SETTINGS on page 25
INTERCHARACTER DELAY on page 26
BEEP ON ASCII BEL on page 27
BEEP ON NOT ON FILE on page 27
ACK NAK OPTIONS on page 28
ACK CHARACTER on page 29
NAK CHARACTER on page 29
ACK NAK TIMEOUT VALUE on page 30
ACK NAK RETRY COUNT on page 31
ACK NAK ERROR HANDLING on page 32
INDICATE TRANSMISSION FAILURE on page 33
DISABLE CHARACTER on page 33
ENABLE CHARACTER on page 34
To Next Page
Loading...
