Datalogic QuickScan Lite QW2400 - ACK NAK Error Handling

Enter/Exit Programming Mode ACK NAK Options
32 QuickScan™ Lite QW2400
ACK NAK Error Handling
This feature specifies the method the scanner uses to handle receive errors
detected while waiting for an ACK character from the host.
Options are:
• Ignore errors detected
• Process error as valid ACK character
• Process error as valid NAK character
$CR2EH00
ACK NAK Error Handling = Ignore Errors Detected
$CR2EH01
ACK NAK Error Handling = Process Error
as Valid ACK Character
$CR2EH02
ACK NAK Error Handling = Process Error
as Valid NAK Character
DEFAULT