Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode Codabar
164 QuickScan™ Lite QW2400
Codabar Start/Stop Character Set
This option specifies the format of transmitted Codabar start/stop characters.
Codabar Start/Stop Character Match
When enabled, this option requires that start and stop characters match.
$CCBSC00
Codabar Check Character Set = ABCD/TN*E
$CCBSC01
Codabar Check Character Set = ABCD/ABCD
$CCBSC02
Codabar Check Character Set = abcd/tn*e
$CCBSC03
Codabar Check Character Set = abcd/abcd
DEFAULT
$CCBSM00
Codabar Start/Stop Character Match = Don’t Require Match
$CCBSM01
Codabar Start/Stop Character Match = Require Match
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)