Datalogic QuickScan Lite QW2400 - Label ID: Set Individually Per Symbology; Label ID Control

Data Format Enter/Exit Programming Mode
Product Reference Guide 73
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix
for a given symbology type.
NOTE
This setting requires the scanning of bar codes from multiple
sec
tions. See
"Label ID: Set Individually Per Symbology"
on page 250 for more detailed programming instructions.
$CIDCO00
Label ID Transmission = Disable
$CIDCO01
Label ID Transmission = Enable as Prefix
$CIDCO02
Label ID Transmission = Enable as Suffix
DEFAULT