Datalogic QuickScan Lite QW2400 User Manual

Enter/Exit Programming Mode Data Matrix
212 QuickScan™ Lite QW2400
Data Matrix Set Length 2
This feature specifies one of the bar code lengths for Data Matrix Length Con-
trol on page 211. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length
if in Fixed Length Mode. Characters can be set
from 0001 to 3,116 characters in increments of 0001 (pad with zeroes).
See page 259 for detailed instructions on setting this feature.
Select Data Matrix Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/E
XIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
$CDML2
~
Length 2 is 3,116 Characters
DEFAULT

Datalogic QuickScan Lite QW2400 Specifications

General

IP Rating	IP42
Connectivity	Wired
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Light Source	Red LED
Interface	USB, RS-232
Drop Resistance	1.5 m / 5 ft
Reading Range	Up to 30 cm / 11.8 in (depending on barcode density)
Dimensions	6.7 x 2.8 x 2.6 in
Print Contrast Ratio	25%
Decode Capability	1D, 2D codes
Resolution	4 mils
Depth of Field	5 - 30 cm (depending on barcode density and type)
Power Supply	5 VDC
Humidity	5 to 95% (Non-condensing)