Datalogic QuickScan Lite QW2420

Operating Modes
Quick Reference Guide 25
Object Detection — The scanner looks for changes within
its field-of-view. The Aiming Pattern is always on to show
the optimum reading area. If a predefined amount of
movement is detected, the white illumination switches on.
Scanning continues until a label is read or "maximum scan
on time" is reached.
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
 Scan Mode = Trigger Single
Scan Mode = Trigger
Pulse Multiple
Scan Mode = Trigger
Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
 = default value