Datalogic QuickScan QBT2500 Quick Reference Guide

Numlock
24 QUICKSCAN™ QBT/QM2500
Reset Default Settings
NUMLOCK
This option specifies the setting of the Numbers Lock
(Numlock) key while in keyboard wedge interface. This
only applies to alternate key encoding interfaces. It does
not apply to USB keyboard.
★ = default value
NOTE: Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label. See
"Selecting the Interface Type" on page 15 for
more information.
NUMLOCK
ENTER/EXIT PROGRAMMING MODE
★ Numlock = Numlock key unchanged
Numlock = Numlock key toggled

Datalogic QuickScan QBT2500 Specifications

General

Brand	Datalogic
Model	QuickScan QBT2500
Category	Barcode Reader
Language	English