Datalogic QuickScan QM24 Series

Enter/Exit Programming Mode Plessey
174 QuickScan™ I QD24XX/QBT24XX/QM24XX
PLESSEY
The following options apply to the Plessey symbology.
Plessey Enable/Disable
Enables/Disables ability of reader to decode Plessey labels.
DEFAULT
$CPLEN00CR)
Plessey = Disable
$CPLEN01CR)
Plessey = Enable
Plessey Check Character Calculation
Enables/Disables calculation and verification of an optional Plessey check character.
$CPLCC00(CR)
Plessey Check Character Calculation = Disable
$CPLCC01(CR)
Plessey Check Character Calculation =
Enable Plessey std. check char. verification
DEFAULT
$CPLCC02(CR)
Plessey Check Character Calculation =
Enable Anker check char. verification
$CPLCC03(CR)
Plessey Check Character Calculation =
Enable Plessey std. and Anker check char verification